*Note* This will not fit the updated factory link design. If your stock link is wider in the rear, this product will not fit the bike.
The ends of this lowering link are fully CNC machined from solid aluminum and the threaded center portions are stainless steel. This lowering link is capable of adjusting the rear ride height of the 2005 and up Triumph Sprint ST between stock height and 3 inches lowered. Bearings and seals are not included. Use the bearings and seals from your stock link or purchase and install new ones.
No need to remove bolts and disassemble the rear suspension everytime you raise or lower your bike! Just loosen the nuts and rotate the center portion of each link the same amount. You do not have to remove bolts and find a way to hold the bike up while you are doing it!
If you would like to re-use your bearings and seals, we can install them in your new lowering link for an additional $30. Send us your stock link and we will return it with your order.
Installation is simple-
Remove stock link
Install current or new bearings and seals into our lowering link
Install our lowering link and enjoy your new ride height!
